
Labconco FreeZone 2.5 L Benchtop
The Labconco FreeZone 2.5 L Benchtop is a laboratory benchtop freeze dryer. It is sold without a vacuum pump. The smallest of Labconco's FreeZone line: an upright stainless collector holding 2.5 L of ice and removing 2 L a day at -50 °C, with a 5-inch touchscreen, data logging and Ethernet alerts. The -84 °C variant for low-eutectic samples shares the chassis. Sold without a pump. Its 14.5″ × 19.2″ footprint is the second-smallest of the 12 lab benchtop units here.
- Batch
- not published
- Trays
- —
- Pump
- not included
- Approx. price
- ~$9,144
Aqueous samples on a crowded bench
The maker’s own page; we earn nothing from it. Price and availability on Labconco’s site may differ.
Specifications
Manufacturer-published figures, read from documents.thermofisher.com, labrepco.com.
- Pump
- not included
- Voltage
- 110 V
- Circuit amps
- 20 A
- Condenser capacity
- 2 L / 24 h
- Condenser temp
- -50 °C
- Dimensions
- 14.5″ W × 19.2″ D × 16.9″ H
- Touchscreen
- Yes
- Wi-Fi app
- No
- Warranty
- 1 year from installation or 2 years from shipment, whichever sooner; parts and labor (Labconco FreeZone user manual)
- Country of origin
- USA
- Approx. price
- ~$9,144
Power draw is the maker’s 115 V 60 Hz model: 14 A system draw incl. 8 A max vacuum pump; maker states 'requires 20 amp dedicated circuit'. 230 V 50/60 Hz variants: 7 A incl. 4.5 A pump figure.
Weight: maker publishes shipping weight only.
Features
- No pump included
- 110 V
- Touchscreen
- Under 20″ wide
- Made in USA
What owners say
Too few owners of the Labconco FreeZone 2.5 L Benchtop have written about it in the owner discussions read for this site to report on yet, so this section stays empty until there is enough.
From the spec sheet
Points for and against, drawn from the published figures — not owner reports.
- Lyo-Works touchscreen with logging, USB export and email alerts
- Under 15 inches wide
- A -84 °C version exists on the same chassis
- US-built, one-year warranty from installation
- Pump not included; a 98 L/min, 0.007 mbar pump is required
- Distributor list price around $9,100 before the pump
- End-point detection is an optional kit
- 20 A circuit
Compare the FreeZone 2.5 L
Related units
More from Labconco →
Labconco FreeZone 4.5 L Benchtop
- Batch
- not published
- Trays
- —
- Pump
- not included
- Power
- 110 V · 20 A

Labconco FreeZone 8 L Benchtop
- Batch
- not published
- Trays
- —
- Pump
- not included
- Power
- 110 V · 20 A

BUCHI Lyovapor L-210
- Batch
- not published
- Trays
- —
- Pump
- not included
- Power
- 220 V